Compressed Air Operated Blow Off Products

GIPL offers air amplifying compressed air saving blow guns and nozzles, which are handy, low cost air amplifiers. Air amplifying blow guns and nozzles consumes very little compressed air to deliver high volumes of blow air. Air is amplified using "COANDA EFFECT".

Blow and thrust of blown air can be infinitely controllable by regulating pressure.

" Elucidating Client's Success "

Products » Compressed Air Saving Devices » Blow Off Products » eX Blow Gun, Real Blow Nozzles, Real Blow Pipes, Real Blow Jets

eX Blow Gun



Ergonomically designed blow gun, housed in tough and durable engineering plastic to reduce operator fatigue and noise levels. Its wide and high thrust blow reduces operation time.
With 7 times air amplification, eX Blow Gun saves considerable amount of compressed air, thereby reducing input cost, maintenance of air compressor, efficient utilization of resources.
eX Blow Gun is the ideal blow off product, where wide low penetrating, high volume blow is required.



   Performance of Vac Blow Gun
Inlet Kg/Cm2  Air Consumption (CFM)  Total Flow CFM
2.5 11 75
4.0 15 105
5.5 20 140
7.0 23 180

New eX Blow Gun is fitted with threaded brass inlet insert, suspending hook and convinient levered trigger.

Vac Blow Gun



Ergonomic Blow Gun, PSH-7: Ergonomically designed blow gun, housed in tough and durable engineering plastic. It is fitted with lever to reduce operator fatigue and noise levels.

PSH-7 can be used with any blow nozzles to achieve maximum possible productivity and cost saving..

Applications

  • Powder Coating & Paint shops.
  • Pharmaceuticals, formulations & Cosmetics.
  • Petro chemicals, Chemicals & Plastic granules conveying.
  • Textile mills & Textile Process houses.
  • Tool rooms, machine shops & fabrication shops.
  • Automobile plants, workshops & garages, Railway workshops, Ship building.
  • Aerospace industry.
Real Blow Nozzles



Real Blow Nozzles are economical and efficient way to reduce air consumption of compressed air up to 1/25th. It can be fitted on existing setup without any modifications. It can be mounted as well as used as handy blow gun. They are safe as it meets COSHH dead end pressure limits.
eX Blow Gun is the ideal blow off product, where wide low penetrating, high volume blow is required.
So if you run short of compressed air for blow off application,install Real Blow nozzles instead of conventional open pipes or copper tube.
Available in economical aluminum and robust Stainless Steel.
   Performance of Vac Blow Gun
Air Pressure bar   Air Consumption (CFM) 
2.5 8
4.0 13.5
5.5 16
7.0 20
Real Blow Pipes



Real Blow Pipes are factory set air amplifying blow nozzles made out of stainless steel. They are ideal where moderate to low thrust is required, Real Blow pipes can pay you back within hours of purchase. Real Blow pipes can also be fitted on triggered blow gun.
They are safe as it meets COSHH dead end pressure limits. In areas where a real high penetration is required, Real-blow pipe nozzle is highly recommended

Advantages & Benefits to the customer

  • Savings in Energy
  • Efficient cleaning of deep crevices
  • Versatility
  • Lower noise levels
  • Reduced risk

Fetures of Product

  • Amplification Ratio upto 1:12
  • Machine mountable,Handgun mountable
  • Meets OSHA noise & pressure standards.

Real Blow Jets



Real Blow Jets are  air amplifying blow jets made out of SS. They are ideal replacement to open copper / steel pipes. Because of very high thrust, they still offers 2-4 times air amplification. It can be fitted on blow guns or slide valves.
Noise level of these jets does not meet COSHH norms. However they meet safety norms.

Sacrificing air saving part,   BUT it gives really high thrust for cleaning  or pushing something. Again not compromising with safety –be it noise or flying off chips. High thrust jet is an an excellently effective tool for high thrust air blowing

Advantages & Benefits to the customer

  • Savings in Energy
  • Successfully  cleaning stubborn dirt / chips
  • Successfully used for ejecting pressed parts.
  • Lower noise levels then open pipes
  • Safe for operator
  • Good for manual usage

Fetures of Product

  • Amplification Ratio upto 1:12
  • High thrust air blow
  • ,Handgun mountable
  • Meets OSHA noise & pressure standards.